Z PRO - DUCATI - Performance meets Design Perfection

Z PRO - DUCATI - Performance meets Design Perfection

In this blog - Zpro accessories for Ducati - Diavel 1260, Hyper Motard 950, Monster 950, Scrambler 1100

When a rider chooses a Ducati, it’s never just about speed—it’s about soul. Every curve, contour, and click of a Ducati is engineered not just for performance, but for presence. That’s exactly where Z PRO steps in—not to overpower that design language, but to complement it with gear that respects both form and function. From the satin finish of a radiator guard to the clean geometry of frame sliders, Z PRO understands that protection should never come at the cost of beauty. Ducati riders demand equipment that feels like it belongs, that flows with the bike’s silhouette, and that performs without shouting. Z PRO delivers just that—rider-focused enhancements built to echo Ducati’s design DNA while standing up to real-world use. Because when you ride a Ducati, even your accessories should ride with intention.

1. Crash & Structural Protection

1.1 Ducati Diavel 1260 • Frame Slider (ZPRO-DIA1260-FS | ₹5,850)

Build Specs: Steel brackets with CNC-machined aluminum pucks
Key Features: High-profile crash buffer for mid-body impact zones
Why It Matters: Prevents tank, fairing, and crankcase damage in low-speed drops Compatibility: Ducati Diavel 1260

1.2 Diavel 1260 Single Rod Slider (ZPRO-DIA1260-SRS | ₹5,750)

Build Specs: Single steel rod with polymer slider caps on both ends
Key Features: Covers the entire width of the engine area
Why It Matters: Transfers impact energy across chassis without stressing one side

1.3 Diavel 1260 Front Fork Slider (ZPRO-DIA1260-FFS | ₹3,990)

Build Specs: Hardened polymer pucks over stainless axle insert
Key Features: Shields fork base, axle nut, and caliper mounts
Why It Matters: A fork tube scratch = major expense. This = prevention

1.4 Ducati Hypermotard 950 • Frame Slider (ZPRO-HYP950-FS | ₹5,850)

Build Specs: Compact CNC-cut steel mounts with delrin pucks
Key Features: Minimalist, corner-safe, no bodywork interference
Why It Matters: Built to protect on turns and falls

1.5 Ducati Hypermotard 950 Front Fork Slider (ZPRO-HYP950-FFS | ₹3,990)

Build Specs: Reinforced nylon sliders with steel internal rod Key Features: Lightweight design with max ground clearance

Why It Matters: Adds safety without affecting lean angle or corner entry

1.6 Ducati Monster 950 • Frame Slider (ZPRO-MON950-FS | ₹5,850)

Build Specs: Bolt-on steel arms with anodized sliders
Key Features: Mounts to the trellis frame with no mods Why It Matters: Monster riders lean harder—this protects when the lean goes wrong

1.7 Ducati Monster 950 Single Rod Slider (ZPRO-MON950-SRS | ₹5,750)

Build Specs: Axle-length steel rod with double puck configuration
Key Features: Stabilizes and protects both engine cases Why It Matters: Quick, one-part crash solution for left and right falls

1.8 Ducati Monster 950Front Fork Slider (ZPRO-MON950-FFS | ₹3,990)

Build Specs: Nylon slider heads + rustproof rod hardware Key Features: Axle and fork-base crash protection
Why It Matters: Keeps your front end ride-ready post slide Compatibility: Ducati Monster 950

1.9 Ducati Monster 95 Rear Axle Protector (ZPRO-MON950-RAP | ₹3,250)

Build Specs: Heavy-duty polymer heads with steel cross-mount
Key Features: Rear caliper and axle nut protection
Why It Matters: Protects swingarm from gouging during slides Compatibility

1.1.1 Ducati Scrambler • Frame Slider (ZPRO-SCR-FS | ₹5,850)

Build Specs: Black-finish steel arms with mid-mounted slider blocks
Key Features: Designed for casual road drops and light trail spills
Why It Matters: Scrambler riders explore — this saves the metal when curiosity wins

1.1.2 Ducati Scrambler • Front Fork Slider (ZPRO-SCR-FFS | ₹3,990)

Build Specs: Dual-layer puck with corrosion-resistant rod
Key Features: Non-obtrusive, fork and axle defense
Why It Matters: Prevents front-end damage in standing or rolling drops

2. Undercarriage & Radiator Protection

2.1 Ducati Diavel 1260 • Radiator Guard (ZPRO-DIA1260-RG | ₹4,950)

Build Specs: Precision laser-cut aluminum mesh with black powder coating
Key Features: Full frontal radiator coverage, airflow-optimized
Why It Matters: Prevents punctures and debris buildup in high-speed runs

2.2 Ducati Monster 950 • Radiator Guard (ZPRO-MON950-RG | ₹4,950)

Build Specs: Stainless steel grille with airflow tunnels Key Features: Designed for high-efficiency Monster cooling system
Why It Matters: Stops stones, leaves, and dirt from killing cooling

2.3 Ducati Monster 95• Paddock Spool (ZPRO-MON950-PS | ₹2,250)

Build Specs: CNC stainless steel with dual-mount thread bolts

Key Features: Allows clean rear lift via standard paddock stands

Why It Matters: Service, wash, lube—all made easy

2.4 Ducati Scrambler • Radiator Guard (ZPRO-SCR-RG | ₹4,950)

Build Specs: Aluminum honeycomb faceplate with powder coating
Key Features: High-flow, low-clog protection
Why It Matters: Protects cooling efficiency in dusty or rural environments

2.5 Ducati Scrambler • Side Stand Extender (ZPRO-SCR-SSE | ₹2,450)

Build Specs: Widened aluminum pad with integrated grip ridges
Key Features: Prevents lean-in and fall on soft or gravel surfaces
Why It Matters: Scrambler riders park where roads end

2.6 Ducati Scrambler • Paddock Spool (ZPRO-SCR-PS | ₹2,250)

Build Specs: CNC stainless steel with dual-mount thread bolts
Key Features: Easy paddock stand compatibility
Why It Matters: Streamlines maintenance and storage

3. Ergonomics & Cockpit Upgrades

3.1 Ducati Hypermotard 950 • Mirror Extender (ZPRO-HYP950-ME | ₹2,450)

Build Specs: CNC-machined alloy spacers, matte finish
Key Features: Moves mirrors outward by 40mm
Why It Matters: Street-legality + rear visibility without cramping cockpit

4. Luggage Systems

4.1 Ducati Scrambler • Top Rack (ZPRO-SCR-TR | ₹5,450)

Build Specs: Laser-cut aluminum tray, weight-rated
Key Features: Lightweight platform for duffel or tail bag
Why It Matters: Touring-ready without bulky frames

4.2 Ducati Scrambler• Top Box (ZPRO-SCR-TB | ₹6,950)

Build Specs: ABS-molded hard shell with internal foam lining
Key Features: Lockable, weather-resistant, urban-friendly
Why It Matters: No more backpack strain. Daily carry = handled

Why Z PRO for Ducati.

No guess-fit. Everything mounts where it should. No dead weight. Only protection that works. No aesthetic crime. We keep your bike looking like a Ducati. No excuses. It either protects in real life—or it doesn’t go into production. 

Engineered where it matters.

Ridden where it counts.